The Nikon HR-2 Screw-on Rubber Lens Hood is designed for the Nikon 50mm f/1.4 D & 50mm f/1.8 D Lens. It is primarily designed to prevent unwanted stray light from entering the lens and helps to minimize lens flare by extending and shading the end of the lens. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact. This dedicated lens hood is designed to match the specific focal length of the lens it was designed for.
Snaps onto the front of the lens with a spring type retainer ring. Protect your Nikon investment with genuine Nikon lens, teleconverter and camera body mount caps. Lens caps protect the front and rear portions of your lenses and teleconverters from dust, smudges and scratches. Camera body mount caps protect the mirror box and reflex mirror when a lens is not affixed to the camera body.
Original Canon lens hoods are specifically designed for each lens, ensuring no problems with vignetting or motor functions. Lens hoods block side glare and augment the protection provided by filters to the lens surface and ring. Designed for EF 85mm f/1.8, 100mm f/2.0, 135mm f/2.8 SF & 100-300mm f/4.5-5.6 Lenses.
Canon EW78BII Lens Hood for EF 28-135mm f/3.5-5.6 IS Canon SLR Lens
Hoods offer several benefits to the photographer. Primarily the hood shades the lens from stray light that may result in an unwanted discoloration or hazing of the image, or the appearance of lens flare. Shading your lens helps improve contrast and image quality. A hood is not required to eliminate these problems, as any item used to shade the lens will provide the same protection from stray light. The hood is convenient in that it is built to offer protection while ensuring that it will not inadvertently find its way into your image. Photographers often state the protective abilities of a hood as a reason to have one.
Nikon Auto-Extension Rings Nikon extension rings can be used singly or in combination to vary the reproduction ratio of lenses from 20 to 300mm. They are mounted between the camera body and the lens. Through the lens exposure control automatially compensates for lens extension. Manual and aperture-priority auto-exposure control modes are possible Manual focus only. Auto extension ring with AI diaphragm coupling. Extension: 8mm Dimensions: 64.4(/) x 17.8mm Weight(g): 50
Raynox DCR-6600Pro 0.66x HD Wide Angle Conversion Lens (52mm)
Especially designed for use with high-end digital camera which incorporates the CCD chip of more than mega-pixels, and the lens is made of hi-index optical glasses, 3-group/3-element, fully coated for non-distortion(-1.3%) and sharp images. It's an ideal accessory lens for professionals and advanced amateurs shooting in tight place. There will be no reduction of light value when this conversion lens is attached on the camera's lens. The original Raynox adapters are designed and made to suit the best physically and optically to the DCR-6600PRO lens to obtain the optimum image quality. DCR-6600PRO is also suitable to the 3-CCD chip or mega-pixel Digital Camcorders. (Limited zoom capability) All of Raynox conversion lenses are proudly made in Japan. At Raynox's wholly owned manufacturing subsidiary, every stage of production is rigorously checked and tested so that the lens elements compensate effectively for astigmatism, distortion and spherical aberration.... for an excellent image quality.
Canon EF 25 II Extension Tube for EOS Digital Cameras
Two Extension tubes, in the same 12mm and 25mm lengths as previously available, have been redesigned to accommodate the EF-S mount lenses and its extended rear elements. They're perfectly compatible with all previous EF and TS-E lenses, and will work with any EOS film or Digital SLR. Exposure compensation is often required with cameras other than the EOS-1 Series.