Slik Compact Professional Tripod with Ultra-Smooth 3-Way Panhead
Built with the photo enthusiast in mind, the ABLE 300 DX uses many convenient features that make it easy to use. The legs of the ABLE 300 DX set up and fold down securely, just loosen and tighten leg lock knob to extend or shorten them. 3 position adjustable angle leg locks make for easy set up on uneven ground or steps. These leg locks also allow the height of the tripod to lowered. Combine this feature with the ABLE 300 DX Short Column (optional accessory) and the tripod can be lowered to just 14 inches (350 mm) the for very low angle or macro photography in the field. For even lower angle photography or copy work the standard gearless center column can be reversed (turn upside down) so that the head is at the bottom of the center column, give you the ability to photograph with the camera just a few inches off the ground. The compact all-metal 3-way pan head is made from solid, precision-machined aluminum and has the strength and durability to handle a wide variety of digital and film cameras and lenses. There is a metal quick release plate that positively locks into the head. One lever operation of the quick release lock allows fast mounting and un-mounting of the camera.
Manufacturer: Slik Tripods
When folded, the Slik MINI series tripods are about the size of a standard telephoto lens. They can be carried in your camera bag all the time so tripod support is always at hand!Besides traditional tripod use, the Slik MINI series tripods have another great feature: the ability to use the tripod as a "Chest-Pod" camera support! To use as a chest-pod, first loosen the locking collar around the center column, pull out (raise) the center column at least one inch and tighten. Then, with the legs spread, place the feet of the legs against your upper chest. Loosen the tripod head and position the camera so you can see through the viewfinder comfortably. This will better stabilize the camera and help avoid image-degrading "camera shake."The bottom of the center column has a suction cup, which can be used to mount Slik MINI series tripods on a clean smooth glass surfaces, including windows. Stick a MINI series tripod to a window for a higher angle picture or take photos in low light with a slow shutter speed.All Slik MINI series tripods have 2-section telescoping legs to make the tripod more stable and get the camera up just a little higher.Please Note: The suction cup will not hold up cameras weighing more than 10 ounces! Check your camera's specification to learn its weight. Be sure the surface is clean before trying to adhere a Slik MINI series tripod to any glass surfaces! Do not leave a Slik MINI series tripod stuck to any glass surface for more than 60 seconds, because the weight of the camera could cause it to fall.Same legs as the MINI PRO and MINI PRO-II Uses a newly designed Compact Ball HeadSame head that is used on the SPRINT and SPRINT PRO tripods.Features a precision milled aluminum ball for smooth reliable camera movements.Can easily handle a camera up to 4.5 pounds in weight.
Manfrotto 709B Digi Table Top Tripod with Ball Head (Black)
Tiny table-top tripod perfect for point-and-shoot, compact SLR, and compact camcorder cameras Sets up in seconds to provide a stable shooting platform that can be used virtually anywhere, indoors or out Silky-smooth Manfrotto Mini Ball Head providing 360-degree pan and +-90-degree tilt Aluminum finish, 1/4-inch screw mount Fits in your pocket or in its own belt-loop carrying pouch (not included)
Leica Large Ball-and-Socket Head with 1/4 Tripod Head for Leica M Series (14110)
*Special Order - Call for Availability Accessories that are tailored specifically to Leica M cameras make photography even easier and even more pleasurable. Large ball-and-socket head with A 1/4 (1/4") DIN 4503 tripod thread.
Manfrotto 460MG Magnesium Camera Head - Replaces 3437
An innovative 3D Head unlike any other! Cast from lightweight magnesium, the head can be positioned in virtually any position to get the exact framing of the image. The lock-system using spring-loaded conical joints allows greater flexibility than any other 3D head whether mounted on a tripod centre column or lateral arm. The rubber grip knobs provide finger tip control and wonâ€™t poke you in the eye like conventional handles do. The 460Mg is the ideal head in combination with the Carbon Number One line for 35mm SLRs and medium format cameras. This replaces the Bogen Manfrotto 3437
Manfrotto 468MGRC2 Hydrostatic Ball Head with RC2 Rapid Connect System (3157N)
The 468MG Series Hydrostatic Ball heads is the most advanced ball head of the entire Manfrotto range. Designed to meet the demand of professional photographers for a lightweight, but heavy duty load capacity ball head. Intended for camera and lens loads of up to 35 lbs., this head has a magnesium die cast body, a 2" PTFE coated aluminum ball combined with specially designed tension surfaces provides movements as smooth as silk. The oversized lock knobs combined with the patent pending hydraulic locking mechanism provides the ultimate positive lock with the least amount of effort. Truly an engineering marvel!
SLIK Mini-Pro V Tripod with 2-Way Pan/Tilt Head - Supports 3.3 lb (1.5 kg), Black (611-352)
The SLIK MINI PRO V has an easy-to-use 2-way pan head with simple one handle operation for locking and unlocking the head as well as positioning the camera fast and easy. Just twist the handle to loosen the head, point the camera to frame your subject and twist the handle in the other way to lock the head and camera in position, simple. When retracted and closed, the SLIK MINI series tripods are about the size of standard telephoto lens, meaning they can be carried in your camera bag all the time so tripod support is always at hand! Besides its traditional use as a tripod, the SLIK MINI PRO III has another great feature, the ability to use the tripod as a â€œChest-Podâ€ camera support. To use it as a chest-pod, first loosen the locking collar around the center column, pull out (raise) the center column at least one inch and tighten. Then, with the legs spread, place the feet of the legs against your upper chest. Loosen the tripod head and position the camera so you can see through the viewfinder comfortably. This will better stabilize the camera and help avoid image degrading â€œcamera shake.â€
Manfrotto 475B Pro Geared Tripod without Head (Black)
All aluminum construction and unrivalled in stability, the 475B Pro Geared Tripod incorporates a unique centre brace structure system, reliable quick-action leg locks, non-rollback three faceted centre column, spirit level and rubber/metal spiked feet. The revolutionary centre brace system can be operated in a symmetric or asymmetric way. This allows you to achieve two important results: fast positioning by locking the braces so that all of the legs will spread to the same angle and open instantly, or individual setting of the angle of each leg for the ultimate in tripod flexibility. To avoid annoying delays in leveling the tripod, the telescopic centre braces have been designed with two "click stop" positions that allow you to easily find the same spread angle on all three legs. The second improvement has been made to the leg locking system.
Over the past 75 years, Davis & Sanford has built up a diverse line of well-engineered, sturdy tripods -- from low-priced, high value tripods for the weekend image taker to versatile, rugged tripods for around-the-clock professionals, and everything in between. Plus, Davis & Sanford provides a variety of platforms, tripod heads and accessories to meet a range of specialized applications. All Davis & Sanford tripods share some important features: Strong, yet lightweight materials such as aircraft-quality aluminum and high-tech synthetics provide excellent durability and functionality Powder-coated or anodized protective finishes resist abrasion under the heaviest use Ten-year warranty on all tripods gives you complete confidence in your purchase ProVista Airlift with FM18 Head Features: Perfect for field, studio, educational or industrial applications World's first portable tripod that can perform pedestal shots 3-section tripod, non-glare black anodized aluminum Double-strut top leg section for extra stability Pneumatic cylinder in center post provides smooth and easy floating action height adjustment for cameras weighing from 2 to 12 pounds Center brace with lock adds more stability Self-aligning metal quick-flip leg locks offer fast set up Non-skid rubber feet grab any surface Maximum height: 68 inches Folded length: 32 inches Minimum height: 31 inches Maximum tripod load: 12 pounds Centerpost adjustment 11 inches Weight: 9 lbs Fluid head ensures smooth operation Sliding quick release plate system affords variable balance control 2 adjustable removable pan handles provide easy maneuverability Independent tilt-and-pan adjustment/locks deliver effortless control Bubble level for easy leveling Head tilt adjustment: 90 degrees up / 90 degrees down 360-degree pan Platform size: 3.75 x 3.25 inches