1) 3D flips!
Stabilty and agility in flight simplify professional 3D maneuvers like pirouettes 3D fun flips,rolls,and more.
2) 2.4GHz Radio control
By using of the 2.4GHz spread spectrum technology,the model has the characteristics of long control distance,strong anti-interference ability,small power consumption and rapid response.
The latest 3-axis flight control system,with adjustable gyro sensitivity,permits super stable flight.
4) 3D Full flight
Up, Down, Left, Right, Forward, Backward, Leftward flight, Rightward flight.
3 way precision controller: up/down, left/right, forward/backward
Speed up mode
Two Fly Mode:Indoor/Outdoor
Built-in three axis Gyro
1x 4CH 3-axis quadcopter
1x 2.4G LCD remote
1x 3.7v 350mAh lipo battery (builted-in quadcopter)
1x USB Charger
2x Main blades A
2x Main blades B
1x English Manual
Product Battery: 3.7V/350mAh Li-po
Charging time: About 40 Minutes
Flying time: About 5-6 Minutes
Controlling distance: About 40 Meters
Channel: 4 channels
UDI U818A 2.4GHz 4 CH 6 Axis Gyro RC Quadcopter with Camera RTF Mode 2
Manufacturer: UDI RC
Brand: UDI RC
3D Full Flight: Various control options for those piloting the U818A Up/Down, Left/Right, Forward/Backward, Leftward flying/Rightward flying, Suspension, 360Â°flips, Video recording, Photographing Includes: 1 x U818A RC Quadcopter with Camera, 1 x 2.4G Remote Controller (does not include 1.5v AA batteries), 1 x AC Adaptor, 1 x Charge Box, 1 x 2G memory card, 1 x LiPO 3.7V 500mAh Battery, Main Parameter: Helicopter Size: 410 x 410 x 60 mm, Helicopter Weight: 4.6 oz, Packaging Size: 546 x 368 x 95mm, Packaging Weight: 2lb 9.1oz, Battery: 3.7V 500mAh LiPO, Charging Time: about 120 mins, Flying Time: 6~9 mins, Controlling Distance: about 30 meters, Step 1. Insert the battery into the quad-copter and plug it in the receptacle. (Make sure battery is fully charged.) Step 2. On the Remote Control make sure the left throttle stick is all down, then insert new batteries and turn on the remote. Step 3. Wait for few seconds to see if both device will sync. You will hear three beep sound when devices are paired. (Proceed to Step 4 if device is not synced.) Step 4. On the left throttle stick, push it all the way up and down quickly.Step 1. Insert the battery into the quad-copter and plug it in the receptacle. (Make sure battery is fully charged.)Step 2. On the Remote Control make sure the left throttle stick is all down, then insert new batteries and turn on the remote.Step 3. Wait for few seconds to see if both device will sync. You will hear three beep sound when devices are paired. (Proceed to Step 4 if device is not synced.)Step 4. On the left throttle stick, push it all the way up and down quickly.
Latest 6-axis flight control system with adjustable gyro sensitivity. Very easy to fly - novice to expert. Can charge through USB from your computer! Completely pre-assembled, no construction required! Fun straight out of the box! Includes 4-channel digital proportional RC system. Get off the computer and in the air!.
1. Material: Plastic, Alloy
2. Channel: 4
3. Battery: 3.7V 380mAh Li-Po
4. Remote Control Battery: 4 x AAA
5. Main Rotor Diameter: 2.17"/ 55 mm
6. Fit Ages: 14+
7. Flight Time: 9 minutes
8. Charging Time: 30 minutes
9. Frequency: 2.4GHz
10. Camera: 2.0MP
11. Color: Red Black
12. Dimensions: (3.15 x 3.15 x 0.98)" / (8 x 8 x 2.5)cm (L x W x H)
Package Includes: 1 x Quadcopter 1 x Remote Control 1 x USB Cable 4 x Rotor 1 x Manual
Hubsan X4 H107C Quadcopter Spare Parts Crash Pack Black/Red
Body shell color: mainly red+black.;Material: durable hard plastic and soft rubber.;Fully compatible with Hubsan X4 H107C Quadcopter.;Includes one body shell+4 rubber feet, 4 spare blades set (16 pieces), one spare 380mA battery, 2pcs motors (one clockwise and one anti-clockwise) and 2pcs LED lights.;A wonderful all-in-one crash pack kit for replacing the old or broken ones of Hubsan X4 H107C.
Estes 4606 Proto X Nano R/C Quadcopter (Colors Vary) (Discontinued by manufacturer)
Manufacturer: Hobbico Inc
Color: Please Select
â€¢Plastic body with window and trim detail
â€¢LED light indicates front and back of the heli, and also helps in low light flying
â€¢4-channel 2.4GHz Radio with digital trims
â€¢Four micro motors
â€¢100mAh 3.7V LiPo battery
â€¢USB charge cord
â€¢One-piece PCB frame
INCLUDES: RTF Proto X Nano Quadcopter, 2.4GHz Radio, LiPo Battery, USB Charge Cord, 4 spare rotor blades, and Instructions
AAA Batteries: Two for transmitter
â€¢Dimensions: 1.8 x 1.8" (45 x 45mm)
â€¢Weight: 0.40oz (11.5g)
COMMENTS: Due to its very small size, the Proto-X has a built-in LiPo battery that is not designed for replacement. Attempting to remove or replace the Lipo battery will likely damage the quadcopter. In addition, precise placement of the battery is critical for proper CG, balance and performance and isn't recommended for consumer replacement.
Traxxas was started in 1986 with an idea for what was at that time an entirely new concept for a fully assembled, hobby-class R/C car. This new car would have all the same benefits of a hobby-class kit such as replaceable parts, hop-ups, and a high-quality component radio system, however it would be fully assembled with a colorful body, right out of the box. Traxxas coined the term "Ready-To-Run" (RTR) to describe this new class. Since a fully assembled, ready-to-run car would appeal to the entry-level beginner, a toll-free customer support line was set up from day one to service an entirely new category of hobby consumer. At first, acceptance of the RTR concept was slow because traditional R/C kits had always been unassembled. Once people realized that a Traxxas RTR had the same performance and quality as the traditional R/C kits, only that they didn't have to build it, the ready-to-run car was a runaway hit! A kit version would still be offered for those who still wanted to have the building experience.
Lightweight airframe with nice durability Latest 6-axis flight control system with adjustable gyro sensitivity Permits super stable flight, flying outdoor Motor(X4): 0820 Coreless Frequency: 2.4GHz + 5.8GHz (Video transmission) Transmitter: 2.4GHz 4 channels vs 4.3 Inch LCD Control distance: 50 - 100meters Live video distance: around 100 meters Battery: 3.7V Voltage, 380mAh li-po battery with auto cut off safety PCB Charging time: about 30 minutes Flight time: around 7 minutes USB charging cable allows to charge by computer or wall charger Camera: 0.3M pixels camera included, resolution: 640 x 480 Instant video review on transmitter Memory card: SD card inserted in TX, Micro SDHC class6 2-16G (optional) 4 night LED lights and rubber feet.
The Phantom 2 Battery for Phantom 2 and Phantom 2 Vision works on the Phantom 2 series of quad copters and features intelligent balanced charging circuitry built-in. With 5,200 mAh of power you can expect flights of 25-28 minutes on a single charge. With the built-in power gauge you'll always know how much charge is remaining at the touch of a button.
Hubsan X4 (H107L) 4 Channel 2.4GHz RC Quadcopter, Black
Manufacturer: Tenergy - Hobby
Direct from Atomik RC - the palm sized Hubsan X4 Mini RTF RC Quadcopter. Excellent features including full 4 channel 2.4Ghz control, powerful coreless motors, high capacity LiPO battery and stunt mode. This quad is suitable for indoor and outdoor flight thanks to the ultra stable 6-axis flight control system with adjustable gyro sensitivity. The LiPO battery is charged via USB with the included USB charger. Brought to you by Atomik RC, your one stop online RC shop. Motor Type: Micro Coreless. Batteries: Included: 1S 240mAh 3.7V LiPO. Charger: USB. Radio: Included: 2.4Ghz 4 Channel. Fuel Source: Electric. Length: 2.4 in (60mm). Width/Diameter: 2.4 in (60mm).