VideoSecu 1/3" Pixim WDR Vandal Dome Security Camera Infrared Outdoor Day Night Varifocal CCTV Zoom 690TVL 4-9mm Lens Home Surveillance with bonus Warning Sticker VD70H WD3
This ultra WDR high end security camera builds in 4-9mm Lens. External zoom and focus are quick and easy. It employs DPS (Digital Pixel System) image processing technology and 1/3" PIXIM Ultra WDR image sensor that ensure wider dynamic range and lower exposure, which delivers quality and accurate color image in challenging lighting conditions such as glare, direct sunlight, reflections and strong backlight. The anti-noise technology efficiently reduces the data volume of digital storage and transmission. Notes: Near-infrared light, is beyond what the human eye can see, but most camera sensors can detect it, color camera in daylight without an IR-cut filter will therefore see a significant amount of infrared light resulting in strange colors. With a Mechanical IR-Cut filter switch, during the day this camera uses an IR-cut filter. IR light is filtered out so that it does not distort the colors of images as the human eye sees them. When the camera is in night (black and white) mode, built in IR illuminator active, the IR-cut filter is removed, allowing the camera detect infrared light reflect from the object. It is ideal for Home, Finance & Stock Market, Apartment, Entertainment, Casino, Airport, Military, Jewel Shops, Hospital, Car Park, Supper Market, Restaurant, and Mass Transit surveillance. Note: this is a CCTV camera. It is part of a security system and need work with other equipments, like a Digital Video Recorder, cable and monitor (not included).
RioRandTM RRC893 (Iv) 3.5" LCD Monitor Cctv Camera Video Test / Tester
MODEL: RRC893 Video Test Signal mode: NTSC/PAL (Auto adapt) Display: 3.5 inch digital TFT-LCD ,960 x 240 resolution LCD adjustment: Brightness, Contrast, Saturation adjustable Video IN/OUT: 1 channel BNC Input & 1 channel Output Video Output Mode: 1.0 Vp-p Video Level test Level test: Video signals measured in IRE or mV PTZ controller Communication: RS232, RS422 simplex and RS485 PTZ Protocol :Compatible with more than 20 protocols such as PELCO-D/P, Samsung, Panasonic, Lilin, Yaan, etc. Baud Rate: 150,300,600,1200,2400,4800,9600,19200bps Video Signal Generation Color bar generation: Output one channel PAL/NTSC colorbar video signal for testing monitor or video cable. UTP CABLE TEST UTP cable test: Test UTP cable connection status and display in the screen. Read the number of the test box. DC12V 1A power output DC12V power output: Output DC12V1A power for camera Audio input test Audio input: test test the pickup and other audio equipments on the front-end RS485 data analyst Data Monitor: Captures and analyzes the command data from controlling device POWER Power Adapter: DC5V, 2A Battery: Bui:lt-in 3.7V Lithium polymer battery ,3000mAh Rechargeable After charging 3-4 hour, working time lasts 12 hours Low Consumption: Energy saving technology General Working Humidity: 30%-90% Dimension/Weight: 176mmx94mmx36mm/340g
RioRand (TM) 2.8" LCD Monitor CCTV Security Camera Cam Video PTZ Test Tester RRC890
- 2.8" TFT-LCD , 960 x 240 resolution.
- Adjustable brightness, contrast, color of LCD
- Automatically identify and adapt the video mode of NTSC and PAL
- Color bar Video signal generator, transmit/receive colorful images
- Support more than twenty kinds of PTZ controller protocols. For example, PELCO-P, PELCO-D, SAMSUNG etc.
- Capture the PTZ protocol to assist the setting personnel to find out the control protocol and therefore easily target the problematic equipment.
- Support RS232 and RS485 interface, the rate 150-19200bps
- Powerful in testing LAN cable, measuring the connecting status and displaying the sequence of connection.
- PTZ(P/L & Zoom) Control: Control the status of P/L, zoom in/out the camera, adjust the aperture, foci and setting parameters, run and call the preset.
- Lithium Ion Polymer Batteries (3.7V DC2000mAh), more reliable and work 11 hours.
- Signal mode: NTSC/PAL (Auto adapt)
- Display: 2.8 inch digital TFT-LCD ,960 x 240 resolution
- LCD adjustment: Brightness, Contrast, Saturation adjustable
- Video Output Mode: 1.0 Vp-p
- Baud Rate: 150,300,600,1200,2400,4800,9600,19200bps
- Low Consumption: Energy saving technology
- Working Temperature: -30oC - +70oC
- Working Humidity: 30% -90%
- Dimension: 170mm x 99mm x 48mm
- Tester weight: 293g
ST895 3.5" LCD CCTV Camera Video Tester Set with PTZ DC12V/1A Output + Multimeter + Optical Power Meter for CCTV System Installation and Maintenance, Dome Camera and All-in-one Camera Testing
This product is designed for On-site installation and maintenance of video
monitoring system. It can be used for displaying video, controlling PTZ,
DC12V/1A power for camera, Audio input test, generating images, capturing data
of RS485 and testing LAN cable etc. With feature of easy operation and
portability design, it can simplify the installation and maintainance of the
video camera. Also it enhances the working efficiency with lower expenditure of
the project. Lithium Ion Polymer Battery (3.7V DC3000mAh). Adopts advanced power
control and protection circuit. High power-efficient, energy saving and
environmental protection. It can last 12 hours for normal use after charging for
* Optical Power Meter, used for optic fiber CCTV monitor system, CATV system,
optic fiber communication networks deployment and test
* Digital Multi-meter, Voltage, Current, Resistance and Capacitance measuring,
Continuity testing, Diode testing
* Video displaying. Automatically adapts and displays the video format of
* Video Generating, The PAL/NTSC multi-system colorbar video generator
* PTZ address scanning, search up the ID of PTZ camera
* Data analysis. Captures and analyzes RS485 controlling data to help the
technicians to find out the problem
* Cable testing. It is powerful in testing LAN cables, measuring the connecting
status ，displaying the sequence of connection and the NO. of the LAN cable
* Multi-protocol. Supports more than twenty PTZ protocols. For example, PELCO-P,
PELCO-D, SAMSUNG etc
1xVideo Tester, 1xPower Adapter, 1xLAN Cable Tester, 1xBNC Cable, 1xRS485 Data
Cable, 1x12V/1A Power Cable for Camera
1xAudio Testing Cable, 1xTest lead, 1xOptical Fiber Adapter(SC&ST), 1xSafety
Cord, 1xCarrying Bag, 1xEnglish User Manual
RioRand® Cctv Multi-function Tester With fiber optcial power meter function 3.5 inch multi-function cctv tester (RRC896)
The RioRand Ten-in-One CCTV security tester Combine the video test, Optical Power Meter, PTZ controller, video signal level test, NTSC/PAL color pattern generator, UTP cable test, PTZ protocol analysis, PTZ address scan, DC12 1A output, Audio test to one body.
The RioRand CCTV tester Pro STest-896 is developed for the On-Site installation and maintenance of video monitoring system. It can be used for displaying video, testing video level, controlling PTZ, scanning PTZ address, generating images, capturing data of RS485 and testing LAN cable etc. Its functions, easy operation, and portability makes it simple for the CCTV technician to install and maintain CCTV system, improving work efficiency and get the labor cost down.
STest-896 equipped with the Optical Power Meter. Use in testing the laser power of Video Fiber Optic Transmission equipment, and testing the Fiber Optic Patch Cord , etc.
* Data analyst. Captures and analyzes RS485 controlling data to help the technician to find out the problem.
* Cable testing. It is powerful in testing LAN cable, measuring the connecting status ，displaying the sequence of connection and the NO. of the LAN cable.
* Multi-interface and Multi-baud rate. Support RS232 ,RS485 and RS422 interface; baud rate ranging from 150, 600 to 19200bps.
* Multi-protocol. Supports more than twenty PTZ protocols. For example, PELCO-P, PELCO-D, SAMSUNG etc.
* Lithium Ion Polymer Battery (3.7V DC3000mAh). The device employs advanced power control and protection circuit. The device is high power efficient, energy saving and environmental protection. It can last 12 hours for normal use after charging for 4 hours.
* The Fiber Optical Power Meter to measure the power of Video Fiber Optic Transmission equipment, and testing the Fiber Optic Patch Cord
1 x CCTV Fiber Optical Security Tester
RioRand® Cctv Multi-function Tester PRO M - Built-in Digital Multimeter - 3.5" LCD Monitor Cctv Tester Video / PTZ Tester / Security Camera / Cable Tester /Cctv Monitor Test Tester/Multimeter+Optical power meter ALL IN ONE function(RRC895)
CCTV Tester Features:
1. 3.5"TFT-LCD 960(H)×240(V)resolution.
2. DC12V 1A power supply for camera.
3. Audio input testing.
4. Digital multimeter, voltage, current, resistance and capacitance can be tested, continuity testing, diode testing.
5. Optical power meter, testing the laser power of Video Fiber Optic Transmission equipment, and testing the Fiber Optic Patch
Cord , etc.
6. PTZ control. Pan/tilts the P/T unit, zooms in/out the lens, adjusts the focus, aperture and sets and calls the preset position
7. PTZ continuing rotate test
8. Video displaying. Automatically adapts and displays the video format of NTSC/PAL. LCD Brightness/Contrast/Color Saturation are adjustable.
9. Video Level testing, video signals measured in IRE or mV
10. Video Generating, The PAL/NTSC multi-system colorbar video generator (seven-system switchable, transmit/receive seven- system colorful imagines)
11. Data analyst. Captures and analyzes RS485 controlling data to help the technician to find out the problem.
12.Cable testing. It is powerful in testing LAN cable, measuring the connecting status ,displaying the sequence of connection and the NO. of the LAN cable.
13. Multi-interface and Multi-baudrate. Support RS232 ,RS485 and RS422 interface; baud rate ranging from 150, 600 to 19200bps.
14.Multi-protocol. Supports more than twenty PTZ protocols. For example, PELCO-P, PELCO-D, SAMSUNG etc.
15. PTZ address scanning, search up the ID of PTZ camera.
16. Lithium Ion Polymer Battery (3.7V DC3000mAh). The device employs advanced power control and protection circuit. The device is high power-efficient, energy saving and environmental protection. It can last 12 hours for normal use after charging for 4.5 hours.
Autos-Family Vagtacho USB Version V 5.0 VAG Tacho For NEC MCU 24C32 or 24C64
VAG Tacho USB Version V 5.0
Lastest version 5.0, support VDO with 24C32 or 24C64,our vagtacho usb version 5.0 includes the functions of vagtacho usb 4.52 , vagtacho usb 4.0, and vagtacho usb 3.5
VAG Kombiinstrument / Immo box eeprom programmer! Windows 7, Vista, Win XP, Win 98 compatible software!
Support for some VDO dashes for VW from year 2009-2011 with NEC mcu and 24C32 or 24C64 eeprom memory.
Important: These dashes requires ignition to be switched on with valid key of the car! Software version 5.0 works ONLY with interfaces which has got built-in programmer for Megamos ID48 transponders!
Built-in programmer for Megamos ID48 transponders!
Pre-programming of TP2x transponders as dealer's keys with component security data which is read from immobiliser!
NEW key programming feature for VAG cars with VDO dashes on CAN bus! (TP2 and UDS protocols)
Note: TP22,23,24,25 transponders are required!
Read ecu info
Read pin code
Programmer new key
Clear ecu errors
Viem memory buffer
Sourcingbay Portable Video Security Tester Screen Cctv Camera TFT LCD Audio Test Monitor Wb
Screen: TFT 3.5 inch
Resolution: 960 x 240
Power out: DC power out*1(support CCD camera of power source/Max electric currency 350mA)
Surfave treatment: Polyester wadding (elastic paint)
Battery: Built-in rechargeable lithium batterey 3.7V (1600mA)
Status Indicator:3LED Power IND=Red Charging IND=Red 12VOUT=Red
Interface: OSD Power
Video input standard: PAL/NTSC
Video in:Video in(A/V IN conncetor)
Power source:External power:DC 5V 1.0A Adapter
Size: 93mm x 75mm x 40mm
1 x 3.5"" Camera Security Tester
1 x Power adapter
2 x Cables
1 x BNC to RCA Changer(US Plug)
1 x User Manual