Manfrotto 502 Video Head MVH502AH
Manufacturer: Manfrotto Brand: Manfrotto Model: MVH502AH Color: Black
This head is the perfect synthesis between and innovative "Bridge Architecture" and manfrotto's Cutting edge engineering. A pan fluid drag system gives more ergonomic operation while a wider top plate and longer sliding plate offer extra stability and balance. This head offlbs @mmers an even more rigid structure for maximum precision and improved responsiveness. The built in easy link connectors offer extreme flexibility for accessory attachments. The counterbalance system and ball bearing drag sysem both offer precision and smoothness of operation. This head has been carefully constructed from lightweight modern materials for optimal balance of strength and size. Technical Specifications: Max Payload 13.2lbs; CSB 8.8lbs@55mm; FDS pan variable cartridge; FDS tilt variable cartridge; Tilt range +90Â° / -85Â°; Camera fixing quick release; Top plate 140mm 5.5 inches; Height 5.1in.; weight 3.5lbs.
Magnus VT-4000 Professional High Performance Tripod System with Fluid Head
Manufacturer: Magnus Brand: Magnus Model: VT-4000 VT4000
Supports loads up to 8.8 lb (4 kg) Features a 65mm ball base Two-way fluid head for smooth motion Fixed counter-balance spring set to 3.3 lb (1.5 kg) provides smoother tilt movements 2-stage design allows you to adjust the height of the tripod from 27.6" to 59" (70 to 150 cm) Middle spreader provides enhanced stability by holding the tripod legs in locked position Provides fixed counter balance, pan, and tilt drag Allows you to leverage the slide range of +20 / -25mm to enable travel capabilities - essential in balancing uneven configurations Provides camera mounting via a slide plate that can be attached via a 0.25" (6.35mm) screw with video pin Offers tilt angle adjustments from +90Â° to -60Â° Ground spikes for outdoor use and convenient retractable rubber feet for delicate floor surfaces Weighs 7.9 lb (3.6 kg) General: Load Capacity: 8.8 lb (4 kg) Maximum Height: 59.0" (150 cm) Minimum Height: 27.6" (70.1 cm) Folded Length: 30.3" (77 cm) Leveling Bubble/Illuminated: Yes/no Weight: 7.9 lb (3.6 kg) Head: Counter Balance System: Fixed counter-balance spring @ 3.7 lb (1.7 kg) Quick Release/Wedge Plate: Yes/no Balance Plate: Yes Slide Range: +20/-25mm Tilt Drag: Yes Tilt Range: +90Â°/-60Â° Tilt Lock: Yes Pan Lock: Yes Legs: Head Attachment Fitting: 65mmm half bowl Material: Anodized aluminum Leg Stages/Sections: 2/3 Leg Lock Type: Flip locks Independent Leg Spread: No Spiked/Retractable Feet: Yes/yes Center Brace: Yes [mid-level]
Manfrotto MVH500AH 755CX3 Lightweight Fluid Video System with Carbon Fiber Legs and Bag (Black)
Manufacturer: Manfrotto Brand: Manfrotto Model: MVH500AH,755CX3 Color: Black
The lightweight fluid video system MVH500AH,755CX3 includes the fluid video head (flat base) MVH500AH and the MDeVe Carbon Fiber Tripod 755CX3. The MVH500AH is a lightweight head with a wider platform for HDSLR bodies and the sliding plate travels to balance the latest interchangeable lens cameras. The entry-level 500 ensures smooth shots and fine control with up to 5kg (11 lbs.) of equipment. It's the most compact head in our successful Bridging Technology range and it also replaces the Manfrotto 701HDV video head. Beautifully smooth shots: the 500 has professional fluid cartridges on both pan and tilt axes to ensure that every camera movement is smooth, controlled and precise. Faster, easier and safer to use: the side lock system allows the camera and sliding QR plate to click quickly into the head from above, instead of needing to be aligned and slid in from the back. No secondary safety lock is necessary. The side lock system also makes it quicker and simpler to lift the camera out of the head from above. The 500 has a pre-set counterbalance of 2.4kg (5.3 lbs.), but is able to support equipment of up to 5kg (11 lbs.). The 500 has one Easy Link 3/8" connector to allow an external monitor or other accessory equipment to be fitted. The 755CX3 Carbon Fiber MDeVe tripod is a hybrid two-stage (or 3-section), carbon fiber single leg-tube tripod that's compact and lightweight. It has a flat head plate, but a built-in MDeVe 50mm half-ball leveling system (locked by a rotating grip...
Manfrotto MVH500A Pro Fluid Head with 60mm Half Ball (Black)
Manufacturer: Manfrotto Brand: Manfrotto Model: MVH500A Color: Black
The MVH500A is a lightweight head with a wider platform for HDSLR bodies and the sliding plate travels to balance the latest interchangeable lens cameras. The entry-level 500 ensures smooth shots and fine control with up to 5kg (11 lbs.) of equipment. It's the most compact head in our successful Bridging Technology range. MVH500A is supplied with a 60mm half ball video tripod mount and it also replaces the Manfrotto 701HDV video head. Beautifully smooth shots: the 500 has professional fluid cartridges on both pan and tilt axes to ensure that every camera movement is smooth, controlled and precise. Faster, easier and safer to use: the side lock system allows the camera and sliding QR plate to click quickly into the head from above, instead of needing to be aligned and slid in from the back. No secondary safety lock is necessary. The side lock system also makes it quicker and simpler to lift the camera out of the head from above. The 500 has a pre-set counterbalance of 2.4kg (5.3 lbs.), but is able to support equipment of up to 5kg (11 lbs.). The 500 has one Easy Link 3/8" connector to allow an external monitor or other accessory equipment to be fitted. Specifications: Attaches By 1/4" and 3/8" attachment type Attachment 3/8" screw attachment type 1 Bubble Spirit Level Front Tilt -70 Degree / +90 Degree tilt range Head Bowl 60mm Independent Pan Lock Independent Tilt Lock Lateral Tilt -70 Degree / +90 Degree tilt range Maximum Working Temperature 140 Degree F Minimum Working Tem...
Magnus VT-300 Video Tripod with Fluid Head
Manufacturer: Magnus Brand: Magnus Model: VT-300
The Magnus VT-300 Video Tripod with Fluid Head is a lightweight and portable tripod system for shooting stable videos with DSLRs, small camcorders, and any other cameras up to 15 lb. A built-in fluid effect video head pans a full 360Â°, tilts up and down, and features independent pan and tilt locks for fixed-position shots. A pan bar and a snap-in quick-release camera plate are included. The quick-release plate features a 1/4" camera mounting screw, a registration pin, and an anti-skid mounting surface. A center-column raises or lowers at the turn of a hand crank to let you fine-tune a height without adjusting the tripod legs. A mid-level spreader keeps the legs steady when you adjust the tripod, and it locks to keep the legs secure once you've set the tripod in position. Both the center-column and spreader are integrated. The maximum height of the tripod with the center-column raised is 64.3". The tripod legs extend at two leg stages at the release of flip-locks. The legs feature replaceable rubber feet that provide grip on hard or slippery surfaces. An internal bubble level will help you position the tripod evenly on uneven ground. A carry case with a shoulder strap is included and will let you conveniently carry the tripod over your shoulder when you're travelling about."
Flip Video Action Tripod
Manufacturer: Flip Video Brand: Flip Video Model: AAT1B Color: black
Action Tri-Pod stand for FLIP Video: The Flip Video Action Tripod makes it easy to capture all the action, whether you're standing still or on the go. Unfold the Action Tripod legs and place on a level surface to use as a stationary tripod-perfect for shooting steady video from a set location. Or use the attachable straps to attach it to your bike handlebars, helmet, or other gear to record action-packed video even when you're on the go. Compatible with all Flip Video camcorders: Use as a stationary tripod: fold out sturdy legs and place on a level surface to capture video from a set location , Use as action tripod to capture on-the-go action: attach to your bike handlebars, helmet and other gear using the attachable (and removable) straps , Position the adjustable neck to record video at any angle , Features a standard tripod mount that is compatible with Flip Video camcorders and other light-weight tripod-based cameras and devices , Included in package: Action Tripod, two Velcro straps to attach Tripod to gear.
Mactrem Camera Tripod Alluminum Alloy Travel Tripod Portable Detachable Monopod,64.5 inch,360 Degree Ball Head,1/4 Quick Release Plate with Carrying Tripod Bag For Canon Sony Nikon DSLR Cameras
Manufacturer: Zomei Brand: Mactrem Model: MACTREM Q666 Color: 1-black
The Mactrem Camera Tripod provides the perfect combination of Magnesium and Aluminium for maximum portability and maximum toughness. The integrated ball-head and leveller ensure that you never miss-align your next shot, while the legs can be converted from tripod to monopod in a matter of seconds. Great for all level of photographers, compatible with simple point & shoot cameras, mirrorless cameras, and DSLR's, the Mactrem Q666 is the go to tripod. Its versatility is only matched by its portability, the Mactrem Q666 Camera Tripod comes with a carry bag, as well as one year's warranty. It's 37.5lbs capacity should suffice for any camera, video-camera, DSLR, mirrorless, or point & shoot camera. Specifications: Material: Aluminum, Magnesium, Antiskid Rubber, and Non-slip Foam. Maximum Load: 37.5lbs/17kg Max Height (24Â°Leg Angle) w/ Column Extended: 64.5inch/164cm Minimum Height: 22.8inch/58cm Max Height Converted to Monopod: 55.5inch/141cm Number of Leg Sections: 4 Leg Lock Type: Twist lock Center Column: Yes, attach it to the leg section to convert it into a full size monopod. Tilt Range: -45Â°/ +90Â° Drag Control: Yes Panning Range: 360Â° Separate Panning Lock: Yes Complete Tripods Head Type: Ball Head Bubble Level: Yes Head Mount Thread Size: 1/4"-20 Quick Release (QR) Plate: Arca-Swiss Style What's in the box: 1 * Complete Tripod (Including ball head) 1 * Ball Head Bag 1 * Instruction Manual 1 * Mactrem Carry Bag 1 * Wrench
VariZoom VZ-TK75A Aluminum Video Tripod with 65mm Fluid Head and Carry Case
Manufacturer: Varizoom Lens Controls Brand: VariZoom Model: VZ-TK75A
Aluminum Video Tripod with 65 mm Fluid Head and Carry Case
Manfrotto MVH502A,546GB-1 Professional Fluid Video System with Aluminum Tripod and Ground Spreader (Black)
Manufacturer: Manfrotto Brand: Manfrotto Model: MVH502A,546GB-1 Color: Black
The professional fluid video system MVH502,546GB-1 includes the fluid video head (75mm half ball) MVH502A and the pro video tripod with ground spreader 546GB.The MVH502A is a professional video head and has a 75mm half ball video tripod mount. Itâ€™s designed for use with HDSLR cameras and latest interchangeable lens cameras. It offers professional features such as high-performance variable fluidity and a counterbalance setting designed to match the weight of the most popular cameras and their accessories as external monitors, lights or microphones. The 502 head has a pre-set counterbalance of 4kg (8.8 lb.), but is able to support equipment of up to 7kg (15.4 lb.). The 502 head has two Easy Link connectors to allow an external monitor or other accessory equipment to be fitted directly on the head. The 546GB is a two-stage, extremely rigid, stable tripod. Able to carry loads up to 20kg (44.lb). The 546GB has a die cast aluminum crown with a built in 75mm bowl. The tripod's telescopic ground-level spreader helps set leg angles accurately. Leg locks are secure and reliable, and spiked feet with rubber overshoes are provided for solid grounding on both uneven terrain and smooth floors. The tripod can be used with various dollies. Supplied with padded carrying bag. Specification Center Of Gravity 2.16 in Closed Length 32.68 in Counter Balanced Weight 8.82 lbs. Maximum Height 66.14 in Minimum Height 17.32 in Safety Payload Weight 15.43 lbs. Weight 12.13 lbs.
Join Our Community!
Like what you see? Get a FREE account and start posting, sharing, and discovering more!
Have Questions? Contact Us!
Find out the answers to your questions by contacting us. We look forward to hearing from you!