This sync cord can be used as you would normally use the #4103 sync cord, but is a must in order to achieve TTL with the Ikelite TTL Digital Housings to maintain the TTL signal to an Ikelite SubStrobe DS-50, DS-125 or DS-200
Attaches Strobe to Housing
Allows TTL/Manual Use of Strobe
Nickle Plated Brass Bulkheads
Delrin Protective Cap
Product Information Specifications for Ikelite TTL Flash Sync Cord for the Underwater Digital TTL Camera Housings Below:
The Ikelite SLR Flat Port for 3.1-4.1" Lenses is recommended for standard, macro and telephoto lenses. Due to refraction, flat ports reduce the angle of coverage of a lens and magnify the image. This makes the flat port ideal when using standard, macro or zoom lenses to shoot small subjects. Note that if a port is long enough to accommodate the full length of a 1:1 macro lens, the lens may vignette when used at infinity. If access to the lens full range is desired, then select a dome port instead. This port accommodates lenses up to 4.1-inch (10.4 cm) long and 3.3-inch (8.4 cm) in diameter.
This underwater camera covers can keep your digital camera safe and dry , let your take photos in places you wouldnot otherwise take your camera even underwater. You can take all exciting and perfect moments photos and show it to other people via the underwater camera covers.The underwater camera covers are transparent and allow the botton and switches to be operated easily
Maximum water resistant 40 meters
Transparent hard plastic material and waterproof, dustproof
Clear view the camera information and control function.
"O" ring sealed with spring-loaded.
1/4"tripod screw on the bottom
Before close the case,please coat around the joint with the lubricant grease to get the good sealing effect.
Fit for: Canon S100
Net Size: 160*125*125mm
Attention before use:
Check whether good of performance first. Also check whether have sand and dust inside of case.
Must close the waterproof case and put it into underwater at least 200mm deep with 5 Minutes on condition of disassemble but waterproof oil with camera.
Make sure there have no water inside. Then put your camera into waterproof case.
use a large number of fresh water (running water or drinking water) to thoroughly clean the outside of the waterproof shell. Higher than 40 Â° C water may not use, because it will damage waterproof shell.
Need longer cleaning time if ever used waterproof case. Should put into water for several hours.
DiCAPac is the trusted, reliable and affordable case that will convert your camera in to a waterproof and weatherproof camera in no time. No matter how messy the situation is, this JIS IPX8 approved case will protect your camera against water, sand, and dust while also allowing you to take crystal clear pictures underwater. The patented "Roll & Velcro" zipper closure system provides two levels of protection to keep your case completely watertight, while the clear panels and flexible material allows you to maintain complete control over all your camera's functions. It even floats when you drop it in water! This DiCAPac case is specially engineered to fit most popular SLR & DSLR cameras.
It's design fit in every digital SLR and traditional SLR in the market nowadays. Wherever you use it, under the sea, rainy day, on beach, snow ground and some bad envirments. It could provide entire and efect protection for your camera.
This diving suit also fit in swiming and diving. It consist of a diving bag, two basic part of an aotofocus assistant. You can control your digital SLR camera easier under water. Making you enjoy the great interest in underwater photogaphy.
Waterproof within 10 meters
Case dimensions: 22 X 19 x 8cm (L x W x H)
Maximum length of lens: 15cm
Maximum diameter of lens: 9cm
UV protected polycarbonate lens
Transparent soft cover supporting all kinds of operation of camera
Strip assuring waterproof effect
Qualified for waterproof tests
1. Put the appreciate camera cushion ring into waterproof cover, and plug inside the inner tube;
2. Put the camera into the waterproof cover;
3. Fix the waterproof strip onto the sealing position of waterproof cover, please note to align the holes into right position;
4. Tighten the screws;
5. Screw off the lens front cover;
6. Flat the waterproof cover and empty excess air, and tighten lens cover, and it is ready for use
What's in the Box:
1 x Waterproof Case Bag
1 x Wide Neck Belt
1 x Carrying Bag (Yellow)
Note: Cameras and tripods in pictures are NOT included
All brand of SLR/DSLR Cameras
Mozaik - Uni-Tray Locline Single Arm package - Fits all housings
Mozaik - Uni-Tray Locline Single Arm package - Fits all housings Mozaik - MOZ-BTS-SINGLE - Uni-Tray Locline Single Arm package - Fits all housings Sturdy, Easy to Use, Modular, Lightweight, Carry-Friendly and Affordable - Fits ALL housings
A popular Modular Lens Extension for use with many shorter length zoom lenses. The extension threads onto the base of either the Modular 8-inch Dome or the Modular Glass Flat Front for simple assembly and use in a wide variety of applications. Accommodates lenses up to 3.5-inch (8.9 cm) long and 3.3-inch (8.4 cm) in diameter when used with the Modular 8-inch Dome. Accommodates lenses up to 3.4-inch (8.6 cm) long when used with the Modular Glass Flat Front. Measure your lens or use our Port Finder to determine compatibility.